==========================================================================
                 "How-To" Winlink-Express - Windows - Digirig
==========================================================================
This "How-To" explains how to create a Winlink client using Windows 10/11.

You need five things to get started.
1) Windows computer running Windows 10/11
2) One Digirig wired correctly for your radio.
3) One Digirig cable for your radio.
4) One USB cable that works with your Digirig.
5) A Radio

Here are the steps you need to perform to get up and running.
-------------------------------------------------------------
1)  Obtain a Winlink account from winlink.org
2)  Send a Winlink Email via telnet to ensure your account is working.
3)  Install the required software including Winlink-Express and Direwolf.
6)  Configure Direwolf
7)  Configure Winlink-Express
8)  Connect the Digirig to computer and radio
9)  Set the proper volume levels
10) Start Direwolf, then Winlink-Express
11) Start sending Emails over the air.

All of the above steps are covered in detail in the "How-To" document.

Send questions, edits, complaints, or compliments to:
Mike Spohn
N1SPW
n1spw@arrl.net
